알마즌닷컴

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Tips For Repairing Window

Many windows require repair to ensure that they open and close properly. If the seal is cracked and is causing your energy bills to rise or your house to feel drafty, repairing your window can save you money in the long in the long run.

Stiff hinges are often repaired by a small amount of oil or a ratchet tool to loosen the cover of the operator. Repairing a damaged window is also attainable for a DIYer.

Broken or cracked glass

If your window is broken or cracked glass, it's important to take care of the issue as soon as you can. The crack can get worse if left untreated, and could cause airflow problems within your home. If you're not comfortable working on the fix yourself, a professional can help.

There are a variety of ways to repair your window based on the severity of the crack. The most straightforward option is to apply clear tape to the crack. This will protect your family members from being cut by glass shards, but still allow air and sunlight to flow through the room. You can go one step further and use epoxy. This is more labor-intensive, but it can yield a more attractive end product.

In the beginning, you'll need to clean the area around the crack. Dip a cotton rag in a solution of water and soap, then gently clean the area that has cracked. After the window has dried, apply the epoxy according to the instructions on the package. Once the epoxy has hardened, you can make use of a putty knife scrape away any excess and smooth the surface by sanding it.

Stress cracks are the most common type of crack found in home's window glass. They usually begin at the edge of the glass, and then spread across the entire pane. They are often a result of temperature fluctuations in your home and tend to get worse over time.

For double-pane windows, you'll have to replace the entire unit if one pane breaks. This is because these windows are sealed that consists of two glass pieces that function as one piece. This is different from regular windows, which are replaced by a new window repairs frame.

To replace a glass pane in a double-pane window you'll have to remove the glazing clips or points that secure the window. If you're replacing a damaged pane, ensure you keep track of these pieces so you can replace them in the future. For other types of windows it is necessary to scrape off the old putty and then apply it again to the new one.

Stained Glass

The tiny pieces of glass used to create stained glass windows are brittle and fragile. Rough treatment, impact with hard objects or a sudden change in temperature could cause cracks and break the glass.

Even if a piece of glass has been broken it can be repaired and save the cost of removing and replacing the panel. Experts in stained glass can repair the damage using different methods, including releading or refoiling or soldering. They can also paint or patina the glass or add new glass.

Replacing or repairing cracked stained glass can be a challenge and time-consuming. It is essential to employ an expert who is familiar with the various methods of repair and can select the most effective one for your particular project. Reversibility, strength, and visual effect of each repair technique will differ, so each one should be assessed on a case by case basis.

Re-leading is among the most common ways to repair cracked glass. A skilled craftsman will bend the soft ductile led, called came back into a shape to accommodate the crack. After the piece has been bent, it is then soldered into place and then the cement is used to hold it in its place. When the cement has dried, the crack can be cleaned, polished and sealed.

Another way to fix broken leaded glass is noting the crack, and then leading the glass piece again. This is a time-consuming and costly process, but it is effective. First the cracked piece of glass is removed, cleaned and sanded down to smooth the surface. The lead is then removed by using a lead knife or pincers. Any mold or oxidation can be cleaned away with the lead knife. After the lead is removed, the glass surface that was sanded is cleaned and the new lead is welded into the existing lead.

An alternative that is less expensive for repairing stained glass that has sagged is to add reinforcing bars to the window. These are rebar-like supports that run along the inside of the lead, and connect to the frame to prevent sagging. The bars are often hidden behind decorative foiling, making them invisible.

Muntins and Mullions

The term "muntin" is well-known to people who are familiar with windows. These wood strips in vertical form divide the panes of traditional multi-paned windows. Typically, they are used in homes with historic architecture to preserve the authentic appearance and are sometimes required by city ordinances when constructing or renovating a historic district. However, many modern replacement windows utilize muntins for aesthetic purposes only instead of adding strength and stability to the sash. Muntins are still susceptible to damage and can be replaced if they get damaged or rotten.

Many window companies today don't differentiate between mullions or muntins because they all have the same function. They are frequently interchangeable however, if you're replacing your windows, it is essential to understand the distinctions so that you and your contractor can discuss the specifics of the project.

A mullion is a horizontal support that holds several panes of tempered glass. This was a necessity before the advent of glass manufacturing technology since larger pieces were virtually impossible to manufacture. Today's windows do not necessarily require mullions as the frames are constructed from two glass units and glued to each other. However, some older types of windows do have mullions to provide support, and they are commonly used to enhance the appearance of windows.

If your mullions show signs of age they can be repaired easily them by applying a bead or two of silicone on both sides of the muntin. Then press it back into the frame. If you're replacing a horizontal muntin, you may need to use a coping saw to remove the old piece and then form the ends by using a file so that it fits into the mortise of the new horizontal muntin. If not, you can simply buy a new muntin that's a little different from the original to be perfectly matched.

Certain IGUs include real muntins and mullions that are built into the unit to provide effect only. If you experience issues with these components it's probably time to replace your window.

Frame

If you need to touch up the frame, use an sanding pad that has a fine grit. This will eliminate any old paint or stains. Clean it with a dry cloth, and pay special attention to the corners of the mitered joints. If they've opened a bit and you are unable to close them, try closing them gently and apply some wood glue to secure them together again. You can also make use of vinegar to dissolve glue in these areas, but you may need to test it on a corner or two before applying it to the entire area.

If the loose corners are an issue you may be able to disassemble the frame in order to examine them, and follow the steps 3 to 8 to fix it. However, if the separation is very slight and only on one side, you may be able to pull the joint slightly without disassembling it.

If the corners are completely broken you'll need a small clamp, wood glue, and needle-nosed pliers. If only the top or bottom corners are broken it is common to hit finishing nails (those are nails that are thin and are similar to the size of the head) into the corner of the frame, to help keep it firmly in place when the glue is dry. Be careful not to place the nails too close to the corner, or you could weaken the frame. You can reinforce the corner using carpenter's adhesive and a hammer or wood putty.