알마즌닷컴

range rover sport ghost installer Immobiliser 2

Protects your vehicle from key cloning and stops thieves from driving it using your original keys. Our most recent immobiliser is connected to the CAN data network of your vehicle and a unique PIN has to be entered to begin the engine.

Contrary to trackers Ghost does not transmit radio frequency signals & can't be detected with diagnostic tools. There are also no indicators in the form of LEDs or buttons that give away its presence within your car or van.

Anti-key cloning

The ghost immobiliser was designed to combat key cloning and hacking. This device connects to the CAN data network of your vehicle and generates a unique pin code sequence that is activated by pressing the buttons from the factory on your dashboard and the steering wheel. This will stop the thief from being able to start your vehicle. If the incorrect PIN is entered it will stop the engine from starting, making it impossible to drive off with your pride and Joy.

Ghost immobilisers are new technology that is extremely difficult for thieves to beat. The ghost immobiliser, unlike physical deterrents like wheel locks and steering lock that can be cut, is a discrete electronic device. It can't even be recognized by thieves as it emits no radio signals and operates silently.

The next generation of immobilisers are equipped to shield your car from a variety of threats including key-hacking, cloned keys and relay attacks. It can also stop a thief adding a key or replacing your ECU as it won't allow them to start the vehicle without entering the correct PIN code.

In contrast to other immobilisers the ghost immobiliser 2 does not require any additional remote or key fobs for operation. It can be deactivated by the driver's smartphone by using a simple app. This makes it ideal for the times you have to hand your car over to valet parking or servicing without key fobs.

The Autowatch Ghost-II represents the latest evolution of Ghost's immobiliser. It was designed to make it as easy and convenient to use while remaining as secure as is possible. This is achieved by integrating the Ghost-II with the vehicle's CAN data network, which means there are no extra wires that could be concealed or easily found. It also features an integrated feature that allows you to disarm your Ghost-II by connecting to the vehicle's Bluetooth which means you can enter and drive hassle free.

OBD port hacking

OBD port hacking is the most recent method employed by professional car thieves. Thieves can gain access to your vehicle's OBD with a laptop, a mobile application, and a few cables that can be bought online for less than PS50. Once they have access, they are able to do anything they like to do, from resetting your vehicle's fault codes to tuning your vehicle, or stealing it in less than a minute.

If you have an Ghost immobiliser, it can prevent your car from being stolen with this method by requiring that a unique PIN code sequence is entered into your key fob in order to start the engine and then drive away. It communicates with the vehicle's ECU (Engine Control Unit), using the CAN Data Circuit. This is undetectable by any scanning technology, RF or code grabbing. It also has a Service/Valet mode which allows your vehicle to start without the need for a PIN.

You will also need a cable with OBD pins that are connected to the CAN bus. These cables can be found on eBay and Amazon for around P50. You will also require a cable that has OBD pins that are connected to the CAN Bus. These cables are available at Amazon or Ebay for around PS50. You then need to splice the cable into the wire harness of your vehicle for example, in the radio wiring harness.

Once the hacker gains access to the OBD port on your vehicle, they will send diagnostics to the system using high baud rate that will cause a crash of the car's CAN, and prevent the system from functioning. This can cause the engine to stop, doors to lock and even the brakes to activate.

No additional remotes or key fobs required.

The car immobiliser is a fantastic piece of anti-theft technology utilized by millions of modern cars across the globe. Utilizing engine ECU software to stop cars from starting if a false transponder signal is detected by it an aftermarket immobiliser is an excellent way to safeguard your vehicle.

However, it is simple for a burglar to circumvent an immobiliser system if they have access to the code that allows them to disable it. The battery in most key fobs can be removed by removing it, so a thief can use a simple tool to take out the immobiliser's circuit board and replace it with an empty. Then, they'll be able to start your vehicle.

With the TASSA approved Ghost 2 immobiliser, there are no remotes or keys to be purchased. The immobiliser communicates directly with the vehicle's ECU (Engine Control Unit). This is done via a discrete, quiet CAN data loop that is not detected by diagnostic tools such as those used by high tech thieves. It also doesn't make use of a traditional key-fob that has LED indicators, which means it can go undetected at a glance.

There will be times where you have to disable Autowatch Ghost 2's automatic protection for instance, during the valet parking or service job. ghost 2 immobiliser review CAN immobilisers have a mode called "Service Mode that is activated with a simple push of a button on your phone. The car can still be operated however the maximum speed is restricted to 36 mph.

Contact us today to set up an appointment to see our workshop. A member of our team will explain how the system works, and give you your Ghost 2 emergency card, installation certificate, and security guarantee.

Simple PIN code Change Process

ghost autowatch immobiliser is the next-generation device that locks your car without cutting wires, or installing aftermarket key fobs. It connects directly with the vehicle's CAN data network. A personal PIN can be set by pressing buttons on the steering wheel and dash. The device doesn't emit RF signals, therefore it is unable to be manipulated. This makes it undetectable by sophisticated RF scanning or code grabbing technology that modern thieves employ.

The PIN code sequence can be altered whenever you want to lock out previous drivers and even includes an override code in the event of forgotten sequences. During installation, the installer will demonstrate how to accomplish this. The system also has the option of a valet mode that can be used to temporarily disable the pin input sequence so that your mechanic or garage can fix the vehicle without needing to know the code. This is a great option for customers who don't wish their pin sequence to be disclosed, but wish to leave their car with valet parking or service.

In contrast to Thatcham products which require additional key fobs to operate, Ghost is a discreet system that uses the buttons inside your vehicle to create a unique and interchangeable PIN code sequence. This sequence is entered through the smartphone app. There are no additional LED indicators are thrown out, and your car is secured without possibility of being disabled.

Every vehicle is tested

Contrary to key fobs which require you to press buttons, a ghost immobiliser is hidden under your dash or steering wheel so that you don't even know it's there. The device is connected to the car's CAN data networks and the personalised PIN code is programmed into it by using the buttons already on your vehicle. The system won't allow your car to start until the code is entered. This means that thieves can't clone your car's existing keys or access the OBD port to gain access to your vehicle.

Ghost can be used in all vehicles including electric cars motorhomes, vans, and bicycles. It's also extremely versatile and can be set to disable in a variety of situations. For instance, it could be programmed to go into Valet mode when the vehicle is being transported to a valet parking or servicing company. This means that your vehicle can be operated within a set 30mph speed limit and the ghost Immobiliser and tracker (petitfancy.com) immobiliser will activate itself when it is returned to your home.

The device can be reset at any time using your personal PIN number. This is great if you lose the code or if the device becomes unusable.

It's also important to note that the device is completely inaccessible to those who aren't familiar with it. This is because it runs through the buttons that are already on the dashboard of your car and on the steering wheel, and uses the data they transmit to determine which button has been hit. This makes it a completely secure and reliable security system that isn't affected by jamming, RF scanning or door lock pick sets.